Take the 2-minute tour ×
Motor Vehicle Maintenance & Repair Stack Exchange is a question and answer site for mechanics and DIY enthusiast owners of cars, trucks, and motorcycles. It's 100% free, no registration required.

I have a taken the front wheel out of my motorcycle to replace the tyre. When I put the axle back in is it a good idea to grease it? If so what type of grease should I use?

share|improve this question

2 Answers 2

up vote 5 down vote accepted

I would apply a light coating of white lithium grease. It is thin enough that it it won't be wiped off the shaft sliding through the bearings. It also is resistant to getting washed off by rain or routine washing. The light coating of grease should keep the shaft from seizing in the bearings.

share|improve this answer
    
I agree, and as a rule of thumb. If you have something open enough to do routine maintenance (like grease things), do it. Things like grease costs pennies and will give you many more miles. –  Eric Fossum Apr 24 '13 at 16:02
    
+1. Earlier this year, I removed the rear wheel on my Suzuki Boulevard M50 to replace the tire, and had to literally destroy the axle to hammer it out. Reading the forums, it turns out that Suzuki had an assembly guy dozing on the job or something and they forgot to grease the rear axle on pretty much every MY06 bike. It was rusted on there very tight. –  Bungle Oct 17 at 23:46

By all means yes. It is a good practice to grease the axle prior installation.

share|improve this answer
    
Thanks Blossom. Mikes got there first. –  Confused Apr 27 '13 at 15:13

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.