Motor Vehicle Maintenance & Repair Stack Exchange is a question and answer site for mechanics and DIY enthusiast owners of cars, trucks, and motorcycles. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

The struts/pistons are no longer strong enough to hold the boot (trunk for americans) open. I went to buy one from the shop only to find the price was for an idividual unit. Is there ever a case where only one would need to be replaced? - how can I test which one needs replacing if this is the case?

share|improve this question
up vote 7 down vote accepted
Is there ever a case where only one would need to be replaced?

Sure: rust will kill anything but it does tend to start at a point of entry and spread. It could kill one strut before it dissolves the rest of the car. Likewise, a side or corner impact could bend a single strut.

how can I test which one needs replacing if this is the case?

Realistically, if you have a car of some years, I'd assume that they're both gone rather than trying to puzzle out how to squeeze a few more years / months out of one old one.

In terms of testing, you can pretty easily slap together a test rig with scrap lumber.

  1. Bolt the bottoms of both struts to a base plate.
  2. Now attach the tops to something robust but relatively light that you can use for compression testing (e.g., a yard stick).
  3. Press them both down - does one resist much more strongly? That one is better.
  4. Release them both after full compression - which one gets to the top first? That one is better.

If you purchase a replacement strut and repeat the process, I think you'll find that you really want two news rather than one new, one oldish.

share|improve this answer

It has been my experience that the gas struts are similar to headlights. Occasionally one will fail early, but most of the time the second unit fails shortly after the first. If only one side is replaced it will take the load of the weaker side. This causes it to wear prematurely as it is carrying more than half the load. Also remember that any extra weight on the trunk/boot such as snow, bicycle rack or aftermarket spoiler will increase wear and shorten the cylinders life.

share|improve this answer
Good point - the majority of the unbalanced load will hit the strongest spring / damper first and hardest. That's a good reason to assume that they're both aged / poor / bad. – Bob Cross Mar 6 '13 at 13:07

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.