Take the 2-minute tour ×
Motor Vehicle Maintenance & Repair Stack Exchange is a question and answer site for mechanics and DIY enthusiast owners of cars, trucks, and motorcycles. It's 100% free, no registration required.

I ride Honda CD-100 SS, a 100cc motorcycle.

Does increasing the wattage of the headlight bulb affect the mileage(fuel efficiency) of the motorcycle? If it does please explain how.

share|improve this question

2 Answers 2

up vote 3 down vote accepted

Not by any amount you can measure, no. The power consumed by the bulbs are such a small fraction of the total that you would not notice it, unless you are adding multiple spotlights or going all retro-mod, maybe, like this pic from the Telegraph:

enter image description here

share|improve this answer

If you're not increasing the load on the engine then mileage(fuel-efficiency) remains unaffected.

  • Primary source of electrical energy on Honda CD100SS is the magneto, an alternator that cuts magnetic flux from permanent magnets.
  • This alternator generates AC following the principle of Electromagnetic Induction
  • A battery is used as the source of DC. Battery gets charging current from AC generated from magneto after going through Rectifier-Regulator circuit.
  • Generated AC so generated is fed through a Rectifier/Regulator, which performs AC-to-DC conversion, clipping higher voltages etc.
  • In most Indian motorcycles headlight is powered by AC coming out of regulator.

Coming to your question, when you replace say a 35W(12v) bulb with 50W(12v) then new bulb will not glow to its full capacity.

However, if you rewind the stator-coil to produce more current then technically more load is on the engine. This load from stator(magneto) will always be there whenever engine is on.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.