Take the 2-minute tour ×
Motor Vehicle Maintenance & Repair Stack Exchange is a question and answer site for mechanics and DIY enthusiast owners of cars, trucks, and motorcycles. It's 100% free, no registration required.

I share a similar plight with the guy before only difference is it's with an 04 Forester STi. I held the passenger front window switch up for a little too long next thing I know my driver side window goes all the way to the top and the safety mechanism kicks in as if something is in its way which would make the window automatically return to half way open.

I then proceeded to hold down the window switch of both the passenger and driver side for maybe 5 seconds, then 10 then 15 and ultimately 25 second intervals, after which the driver side resumed normal operations.

As soon as I'd turn off the car however the unwanted behavior would return :(. I have all but given up and would love to hear from a Subaru manual as I reside in the Caribbean and have no Subaru dealer to turn to (my vehicle was imported from Japan.)

share|improve this question
add comment

1 Answer 1

My local Subaru dealer tried the same techniques you tried, and also tried to replace with a normal Forester window unit. Unfortunately here in the UK the STi is an import from Japan, so their conclusion was that they would need to replace the entire module - so hopefully I have one coming from Japan and will get it next month.

Apparently there is not a lot that is serviceable in the window module - expectation is that if it won't reset, then it's a replace.

Until then, I can only get the window to the top in small (1 inch) increments.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.