Take the 2-minute tour ×
Motor Vehicle Maintenance & Repair Stack Exchange is a question and answer site for mechanics and DIY enthusiast owners of cars, trucks, and motorcycles. It's 100% free, no registration required.

Aside from not getting paint on the discs and pads, do you have any advice or tips when preparing and painting brake calipers?

share|improve this question
add comment

2 Answers 2

You want to make sure your calipers are PERFECTLY clean. If they're rusty, clean them off with a wire brush attached to a drill. Use a degreaser to make sure the surface is perfectly clean - otherwise you risk having the paint peel/flake in the future. Then use a proper brake caliper paint that is rated at extremely high temperatures. Do several coats and let it dry between coats.

share|improve this answer
1  
I would use brake cleaner instead of soap or simple green (or some other solvent). Brake cleaner just destroys brake fluid and oil, and it won't harm an unpainted caliper. –  JeremyP Mar 16 '11 at 13:13
add comment

In addition to what NoCarrier said, realize that brake fluid is extremely hard on paint, so be careful about doing brake fluid flushing. As far as getting paint on the rotors, I've heard that some people prepping cars for shows will paint a stripe on the caliper, so it may not be as big a deal as you think. :-)

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.