I've got a 1995 Subaru Legacy Outback. I'm trying to get the best price for a clutch replacement and am putting together a list of all the necessary parts and prices.
Can someone give me a list of parts that I should expect to pay for?
To replace the clutch technically you only need a new clutch. However most people will purchase a Clutch Kit that will usually contain
The last 2 items are not always included in a clutch kit and they are not always necessary, although an alignment tool does make life a little easier (technically this is a tool and not a 'part').
It is usually recommended that you get the flywheel machined also, this is a service you can get from most transmission places. Depending on the condition of your flywheel you can skip this part, but as I said it is the recommended practice.
Something to be aware of is that it is a non-trivial job to replace a clutch. It involves separating the gearbox from the engine because the clutch sits between the two, in order to do this one of those two items has to be removed from the vehicle, usually it’s the gearbox. Because of the amount of effort required to remove and subsequently refit a gearbox it is often appropriate to do other maintenance at the same time that can only be done when the gearbox is removed or is much easier accomplished when the gearbox is removed.
If you are paying a mechanic to do a clutch replacement then the cost of labour will greatly outweigh the cost of parts.
You'll need the clutch itself, as well as an alignment tool for installing. This is usually packaged with the clutch, however. Other than that, you can expect to pay to have the flywheel "turned" as well. It is feasible that you would need to purchase/install a new pressure plate, and some might suggest you go ahead and do so, with a vehicle that has that many years on it. My suggestion would be check the price of the pressure plate and weigh it against the cost of potentially having to get back in to install a new one after doing the clutch repair.