Take the 2-minute tour ×
Motor Vehicle Maintenance & Repair Stack Exchange is a question and answer site for mechanics and DIY enthusiast owners of cars, trucks, and motorcycles. It's 100% free, no registration required.

I need to replace a car audio unit on Lancer 9.

The problem is that I have a 2-din panel, that I am unable to remove.

Lancer 9 audio panel

When I pull the panel at the mark "1" - it is being released a bit on the bottom, but something is still tightly holding it on the top side.

If I reach out to the mark "2" from the inside of a panel (reachable via opened glove box), I feel there is a philips screw there, that I assumably able to unscrew.

The question is: What else do I need to unscrew, to remove the installed audio unit?

share|improve this question

1 Answer 1

Panels like that are usually removed after removing the head unit. I'm guessing from the picture that it is an aftermarket unit, so you should be able to get an appropriate removal tool (these vary according to the make of the head unit) from your local car accessories shop. Use the tool(s) to remove the head unit, and you'll find a metal cage behind it, usually held in with bent metal tabs. un-bend the tabs to remove the cage, and you'll probably find the screws for the fascia panel behind it.

share|improve this answer
    
Nick, when you say head unit, you mean the audio player itself? –  Maxim V. Pavlov Jan 4 '12 at 17:22
    
Yes, the actual stereo unit in the middle of the dash panel –  Nick C Jan 5 '12 at 15:40

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.