Tell me more ×
Motor Vehicle Maintenance & Repair Stack Exchange is a question and answer site for mechanics and DIY enthusiast owners of cars, trucks, and motorcycles. It's 100% free, no registration required.
up vote 5 down vote favorite
1

How on earth do I remove unsightly scratches from my paint work? There are plenty are are down to the white undercoat, how do I remedy them?

share|improve this question

1 Answer

up vote 2 down vote

Light scratches can be polished and buffed out. I won't detail how to do it here, you can find many tutorials online, but be careful - you CAN burn paint by polishing too hard or staying in one spot too long.

Deep scratches can only be repaired by painting. Your local dealership will be able to sell you a paint bottle that matches your factory color (assuming you have a late model vehicle). Once you fill in the scratch with new paint, use a very fine grit sandpaper (2000-3000) with water to level it out, then polish & buff as above.

share|improve this answer
Would this halfords.com/webapp/wcs/stores/servlet/… match your description? – m.edmondson Mar 7 '11 at 22:24
that's it. just make sure you keep it wet - the water rinses the particulates out of the paper and lubricates the surface. – dave thieben Mar 7 '11 at 22:25
Excellent - whats your opinion on rubbing compounds? – m.edmondson Mar 7 '11 at 22:26
1  
A quick word of warning, wet sanding takes off a lot of material very quickly. You can only remove about 0.3 mils of clear coat safely before you risk permanently compromising your finish. Go slowly and don't sand any more than you have to. – Mike Deck Mar 7 '11 at 22:42

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.