Take the 2-minute tour ×
Motor Vehicle Maintenance & Repair Stack Exchange is a question and answer site for mechanics and DIY enthusiast owners of cars, trucks, and motorcycles. It's 100% free, no registration required.

I have a Honda Civic 2008 whose exterior plastic on one of the taillights was broken sometime ago. I duck taped it to keep it in place. The taillight bulb itself is good and functioning properly.

What options do I have in terms of doing this DIY? Is it possible to just replace the exterior plastic/glass?

share|improve this question
    
Here is a good image of what the tail light assembly looks like. Honda Parts Now.com –  Tester101 Aug 24 '11 at 19:29

2 Answers 2

up vote 5 down vote accepted

Usually the glass is bonded on to the reflector unit, so you probably won't be able to buy the glass on its own - You'll have to buy a complete unit.

Your best bet is to ask around any scrapyards/junkyards in your area, see if they have any Civics in stock, as that would be considerably cheaper than a new unit from Honda.

A decent workshop manual should describe the removal/refitting procedure, most cars I've seen it is usually held in by 2 or 3 bolts and/or a couple of plastic clips.

share|improve this answer

It is possible to replace just the exterior plastic/glass, but the problem is finding it for a decent price. Since your car is a 2008 (newer), it may be harder to find at a scrapyard. If you can, then buy the part. If not, you'll have to get the replacement from Honda and probably pay an arm and a leg, but once you have the part, the actual replacement is not too difficult.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.